Datenblatt: Nimonic® 80A
Nimonic 80A ist eine ausscheidungshärtbare Nickel-Chrom-Legierung. Sie wurde weitgehend durch Nimonic 90 und Inconel X-750 ersetzt, ist aber aufgrund des geringen Kobaltgehalts immer noch für Nuklearanwendungen spezifiziert.
Nimonic® 80A ist auch als Nicrofer 7520 Ti, Pyromet 80A, Superimphy 80A und Udimet 80A bekannt.
Erhältlich in allen Profiloptionen
Nimonic® 80A offers the following key features:
Weitgehend ersetzt durch Nimonic 90 & Inconel X-750
Aufgrund des niedrigen Kobaltgehalts immer noch für Nuklearanwendungen spezifiziert
Aushärtbar
Dynamische Hochtemperaturanwendungen^^
Nimonic® 80A is known to be suitable for the following applications:
Gasturbinenkomponenten
Nuklearsektor
Verbindungselemente
Wkst. Nr. 2.4952
Wkst. Nr. 2.4631
UNS N07080
AWS 031
ASTM B637
BS 3076 NA 20
BS HR 1
BS HR 601
The chemical composition of Nimonic® 80A is indicated in the table below:
Element | Min % | Max % |
---|---|---|
C | 0.04 | 0.10 |
Si | – | 1.00 |
Mn | – | 1.00 |
S | – | 0.015 |
Ag | – | 0.0005 |
Al | 1.00 | 1.80 |
B | – | 0.008 |
Bi | – | 0.0001 |
Co | – | 2.00 |
Cr | 18.00 | 21.00 |
Cu | – | 0.20 |
Fe | – | 1.50 |
Pb | – | 0.002 |
Ti | 1.8 | 2.70 |
Ni | bal |
Nimonic® 80A density, melting point, coefficient of expansion, modulus of rigidity, and elasticity is indicated in the table below:
Dichte | Schmelzpunkt | Ausdehnungskoeffizient | Steifigkeitsmodul | Elastizitätsmodul |
---|---|---|---|---|
8,19 g/cm³ | 1365 °C | 12,7 μm/m °C (20 – 100 °C) | 85 kN/mm² | 222 kN/mm² |
0,296 lb/in³ | 2490°F | 7,1 x 10-6 in/in °F (70 – 212 °F) | 12328 ksi | 32199 ksi |
The typical heat treatment of Nimonic® 80A:
Zustand wie von AWI geliefert | Typ | Temperatur | Zeit | Kühlen |
---|---|---|---|---|
Glühen | Ausgelagert | 700 °C (1290 °F) | 16 Hr | Luft |
Federhart | Ausgelagert | 600 °C (1110 °F) | 16 Hr | Luft |
The typical mechanical properties of Nimonic® 80A:
Glühen | ||
---|---|---|
Ungefähre Zugfestigkeit | <1000 N/mm² | <145 ksi |
Ca. Betriebstemperatur je nach Belastung** und Umgebung | – | – |
Geglüht + ausgelagert | ||
---|---|---|
Ungefähre Zugfestigkeit | 1200 – 1400 N/mm² | 174 – 203 ksi |
Ca. Betriebstemperatur je nach Belastung** und Umgebung | bis zu 550 °C | bis zu 1020 °F |
Federhart | ||
---|---|---|
Ungefähre Zugfestigkeit | 1300 – 1500 N/mm² | 189 – 218 ksi |
Ca. Betriebstemperatur je nach Belastung** und Umgebung | – | – |
Federhart + ausgelagert | ||
---|---|---|
Ungefähre Zugfestigkeit | 1500 – 1800 N/mm² | 218 – 261 ksi |
Ca. Betriebstemperatur je nach Belastung** und Umgebung | bis zu 350 °C | bis zu 660 °F |
Die obigen Zugfestigkeitsbereiche sind typisch. Wenn Sie andere benötigen, fragen Sie bitte.
Handelsname von Special Metals Group of Companies ^^ Dynamische Anwendungen = aktiv / lebendig / wechselnd