Datenblatt: Nilo® 48
Eine Nickel-Eisen-Legierung mit kontrollierter Ausdehnung, die 48 % Nickel enthält. Sein Wärmeausdehnungskoeffizient wurde so ausgelegt, dass er dem von Weichblei- und Natronkalkgläsern entspricht. Diese Legierung hat auch einen hohen Wendepunkt.
Nilo® 48 ist auch bekannt als Invar 48 und Magnifer 50.
Erhältlich in allen Profiloptionen
Nilo® 48 offers the following key features:
Der Wärmeausdehnungskoeffizient ist so ausgelegt, dass er dem von Weichblei- und Kalknatrongläsern entspricht.
Hoher Wendepunkt.
Nilo® 48 is known to be suitable for the following applications:
Industrielle Thermostate, die bei Temperaturen bis zu 450 °C (840 °F) arbeiten.
Glas-Metall-Dichtungen
Wkst. Nr. 1.3922
Wkst. Nr. 1.3926
Wkst. Nr. 1.3927
UNS K94800
AWS 092
ASTM F30
The chemical composition of Nilo® 48 is indicated in the table below:
Element | Min % | Max % |
---|---|---|
Ni | 48,00 nominal | |
Fe | bal | |
Mn | – | 0.80 |
Si | – | 0.30 |
C | – | 0.05 |
Cr | – | 0.25 |
P | – | 0.025 |
S | – | 0.03 |
Al | – | 0.10 |
Nilo® 48 density, melting point, inflection point, thermal conductivity, and coefficient of expansion is indicated in the table below:
Dichte | Schmelzpunkt | Wendepunkt | Wärmeleitfähigkeit | Ausdehnungskoeffizient |
---|---|---|---|---|
8,2 g/cm³ | 1450 °C | 460 °C | 16,7 W/m• °C | 8,5 µm/m °C (20 – 100 °C) 8,3 – 9,3 µm/m °C (20 – 300 °C) |
0,296 lb/in³ | 2640 °F | 860 °F | 116 btu•in/ft2•h °F | 4,7 x 10-6 in/in °F (70 – 212 °F) 4,6 – 5.2 x 10-6 in/in °F (70 – 572 °F) |
The Nilo® alloys are usually supplied and used in the annealed condition (residual cold work distorts the coefficients of thermal expansion). Annealing times may vary due to section thickness.
The typical heat treatment of Nilo® 48:
Typ | Temperatur | Zeit | Kühlen |
---|---|---|---|
Geglüht | 850 – 1000 °C (1560 – 1830 °F) | 0,5 Stunden | Luft oder Wasser |
The typical mechanical properties of Nilo® 48:
Glühen | ||
---|---|---|
Ungefähre Zugfestigkeit | <600 N/mm² | <87 ksi |
Ungefähre Betriebstemperatur | bis zu +450 °C | bis zu +840 °F |
Hartgezogen | ||
---|---|---|
Ungefähre Zugfestigkeit | 700 – 900 N/mm² | 102 – 131 ksi |
Ungefähre Betriebstemperatur | bis zu +450 °C | bis zu +840 °F |
Die obigen Zugfestigkeitsbereiche sind typisch. Wenn Sie andere benötigen, fragen Sie bitte.
*Handelsname der Special Metals Group of Companies