Datenblatt: Incoloy® A286
Diese aushärtbare Eisen-Nickel-Chrom-Legierung wurde für Anwendungen entwickelt, die eine hohe Festigkeit und gute Korrosionsbeständigkeit bei Temperaturen bis zu 700 °C (1290 °F) erfordern.
Incoloy® A-286 ist auch bekannt als Cronifer 1525 Ti, Superimphy 286, Pyromet A286 und Udimet A286,
Erhältlich in allen Profiloptionen
Incoloy® A286 offers the following key features:
Hohe Festigkeit und gute Korrosionsbeständigkeit bei hohen Temperaturen
Aushärtbar
Gut für Hochtemperaturbefestigungen
Statische Hochtemperaturanwendungen **
Incoloy® A286 is known to be suitable for the following applications:
Düsenmotoren
Super-Ladegeräte
Nachbrennteile
Verbindungselemente
D.Nr 1.4944
D.Nr 1.4980
UNS S66286
AWS 023
AMS 5731
AMS 5734
AMS 5737
AMS 5853
ASTM A453
BS HR 52
BS HR 650
ISO 15156-3
(NACE MR 0175)
The chemical composition of Incoloy® A286 is indicated in the table below:
Element | Min % | Max % |
---|---|---|
C | 0.03 | 0.08 |
Mn | 1.00 | 2.00 |
Si | – | 0.50 |
P | – | 0.02 |
S | – | 0.015 |
Cr | 13.50 | 16.00 |
Ni | 24.00 | 27.00 |
Mo | 1.00 | 1.50 |
Ti | 1.90 | 2.30 |
B | 0.003 | 0.01 |
V | 0.10 | 0.50 |
Co | – | 1.00 |
Al | – | 0.35 |
Cu | – | 0.50 |
Pb | – | 0.005 |
Fe | Bal |
Incoloy® A286 density, melting point, coefficient of expansion, and modulus of elasticity is indicated in the table below:
Dichte | Schmelzpunkt | Ausdehnungskoeffizient | Steifigkeitsmodul | Elastizitätsmodul |
---|---|---|---|---|
8,14 g/cm³ | 1430 °C | 16,4 μm/m °C (20 – 100 °C) | 71,5 kN/mm² | 205 kN/mm² |
0,287 lb/in³ | 2600 °F | 9,1 x 10-6 in/in °F (70 – 212 °F) | 10370 ksi | 29733 ksi |
The typical heat treatment of Incoloy® A286:
Zustand wie von AWI geliefert | Typ | Temperatur | Zeit | Kühlen |
---|---|---|---|---|
Geglüht oder federhart | Gealtert | 705 – 760 °C (1300 – 1400 °F) | 16 Hr | Luft |
The typical mechanical properties of Incoloy® A286:
Glühen | ||
---|---|---|
Ungefähre Zugfestigkeit | <750 N/mm² | <109 ksi |
Ca. Betriebstemperatur je nach Belastung** und Umgebung | -200 bis +400 °C | -330 bis +750 °F |
Geglüht + gealtert | ||
---|---|---|
Ungefähre Zugfestigkeit | 950 – 1300 N/mm² | 138 – 188 ksi |
Ca. Betriebstemperatur je nach Belastung** und Umgebung | -200 bis +400 °C | -330 bis +750 °F |
Federhärte | ||
---|---|---|
Ungefähre Zugfestigkeit | 1050 – 1250 N/mm² | 152 – 181 ksi |
Ca. Betriebstemperatur je nach Belastung** und Umgebung | -200 bis +400 °C | -330 bis +750 °F |
Federhart + gealtert | ||
---|---|---|
Ungefähre Zugfestigkeit | 1200 – 1500 N/mm² | 174 – 218 ksi |
Ca. Betriebstemperatur je nach Belastung** und Umgebung | -200 bis +400 °C | -330 bis +750 °F |
Die obigen Zugfestigkeitsbereiche sind typisch. Wenn Sie andere benötigen, fragen Sie bitte.
* Handelsname von Special Metals Group of Companies ** Statische Anwendungen = still/fixiert/regungslos/starr